Filter
 

Air scoop on oil fill hole what do you use for a filter?

Re: Filter
 

Photo's please.

Re: Filter
 

Oiled screen mesh. Equivalent to k&n

Re: Filter
 

Michael Driskell at thirdgen auto has correct replacement I believe.

Re: Filter
 

Air scoop? Nope.
It's an engine breather.
Early design had a metal screen to keep the rocks out. Later models were stuffed with some type of mesh similar in appearance to coarse steel wool.

Photo attached is the later design...I think this one was used 1937 through 1948.

Re: Filter
 

Attached is a link to the 1937-48 breather and a link for the replacement mesh used on 1935-36 only

https://thirdgenauto.com/product/new...-breather-cap/


https://thirdgenauto.com/product/193...t-wire-screen/

Re: Filter
 

I though he was asking about the scoop by the fuel pump.

Re: Filter
 

[QUOTE=35fordtn;2370951]Attached is a link to the 1937-48 breather and a link for the replacement mesh used on 1935-36 only

https://thirdgenauto.com/product/new...-breather-cap/
https://i.ebayimg.com/images/g/x-QAA...-12/s-l500.jpg
NEW 1935-48 Ford oil filler fuel pump stand breather cap 78-6766

https://thirdgenauto.com/product/193...t-wire-screen/
https://i.ebayimg.com/images/g/eHwAA...xDQ/s-l500.jpg
NEW 1935 1936 Ford oil filler scoop replacement wire screen M-92-04

Re: Filter
 

Re: Filter
 

He was. It is not an air scoop. It is an engine breather.