The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Not many customers (https://www.fordbarn.com/forum/showthread.php?t=344951)

Dave Mellor NJ 12-22-2024 01:15 AM

Not many customers
 

1 Attachment(s)
Lucky to have a washboard

Bruce of MN 12-22-2024 05:22 AM

Re: Not many customers
 

Is that a gasoline engine washer? Must have been on the back porch, not inside.

rfitzpatrick 12-22-2024 07:37 AM

Re: Not many customers
 

Gasoline Engine -- YES. Frederick Maytag created the company, Lewis took over, and "Bud" Maytag bought up an Airlines called National. I worked with until 1980 when PanAm bought us.

"Those Were The Days My Friend ---"

Keith True 12-22-2024 08:05 AM

Re: Not many customers
 

They used a flexible steel exhaust pipe that you hung out the window when in use.Same thing with the drain hose.I had and used one.I had the single,pedal start,but they made twins too.

Fullraceflathead 12-22-2024 09:36 AM

Re: Not many customers
 

I have a1928 Maytag to go with my 1928 open cab pickup. I have an idea of creating a "Mobile Wash" as a joke with the Maytag in pickup bed!!!

Marshall V. Daut 12-22-2024 11:17 AM

Re: Not many customers
 

The HECK with what he's selling! I want the truck!!! :)
Marshall

Model A Canuck 12-22-2024 12:00 PM

Re: Not many customers
 

2 Attachment(s)
Quote:

Originally Posted by Bruce of MN (Post 2357548)
Is that a gasoline engine washer? Must have been on the back porch, not inside.

Yes it is.It would have been inside or outside as you could get a exhaust hose with a muffler on the end and put it out thru a hole in the wall to let the exhaust fumes go outside.Most Maytag washers used either a model 92 (single) or model 72 (double) cylinder air cooled engine also made by Maytag

Model A Canuck 12-22-2024 12:05 PM

Re: Not many customers
 

Quote:

Originally Posted by Dave Mellor NJ (Post 2357545)
Lucky to have a washboard

Great picture Dave.I love those open cab pickups :)

ModelA29 12-22-2024 12:56 PM

Re: Not many customers
 

1 Attachment(s)
Lots of people collect the Maytag motors. I guess if you wanted to get the wash done in a hurry you opted for the 2 cylinder.


There will be a few at the Western Antique Power Associates show at Cal Poly next month. Leave you wallet at home or you'll be tempted to buy something VERY heavy.


https://www.wapa.us/index.php

Benson 12-22-2024 01:14 PM

Re: Not many customers
 

Quote:

Originally Posted by Keith True (Post 2357557)
They used a flexible steel exhaust pipe that you hung out the window when in use.Same thing with the drain hose.I had and used one.I had the single,pedal start,but they made twins too.

Were they both two stroke engines as I remember?

Ayers1 12-22-2024 02:53 PM

Re: Not many customers
 

Yes, they were 2 stroke engines. The single cylinder ran more like the hit and miss engines of the day. The 2 cylinder ones ran a little smoother. I have a couple of each.

Bruce of MN 12-22-2024 04:09 PM

Re: Not many customers
 

I have a vague recollection of my Mom telling me that her brother made a motorcycle or car with one of those motors for power.

Gold Digger 12-22-2024 05:22 PM

Re: Not many customers
 

I remember playing out side the back porch where mom was washing with an old Maytag washer. She would throw the flexible exhaust pipe with a big cast iron ball on the end of it out on the ground and when she would let out water from a load of clothes and start another I would be playing in the mud around that muffler and pack mud on it to watch it splatter.

nkaminar 12-22-2024 10:54 PM

Re: Not many customers
 

Washing was done a lot different in the past. Loads of laundry were run through a soap wash and then set aside. The dirty soapy water was dumped and then rinse water added. The laundry was then rinsed in batches. The ringer squeezed the water out. One danger was getting your hair caught in the ringer. I remember what the ringer would do to the rubber dipper covers, blowing them up like a balloon and popping them.

Dave Mellor NJ 12-23-2024 12:53 AM

Re: Not many customers
 

How about the price. $99 in the depression. That's why i said not many customers

Fullraceflathead 12-23-2024 04:23 AM

Re: Not many customers
 

I collect older small gas engines, I have both the single 92 and the twin 72. All Maytag engines were 2 strokes.

Cory Moffat 12-24-2024 01:38 AM

Re: Not many customers
 

Run that flex pipe into a old 5 gal oil pai buried in the ground. Then a piece of pipe to take it to daylight. Suprising how quiet they run

cr1248 12-24-2024 08:00 AM

Re: Not many customers
 

This is a short video that I made when we used to go to the schools to show how things worked in the olden years…an old Maytag that I restored…


https://youtube.com/watch?v=7X4QnBnj...86yEmf8fpbC_c6

Tim Ayers 12-24-2024 08:16 AM

Re: Not many customers
 

Quote:

Originally Posted by Keith True (Post 2357557)
They used a flexible steel exhaust pipe that you hung out the window when in use.Same thing with the drain hose.I had and used one.I had the single,pedal start,but they made twins too.

Yep. Right inside the house.

Keith True 12-24-2024 09:25 AM

Re: Not many customers
 

I had a pail of water outside under the window.I dunked the end of the pipe in it,that worked. Still,the engine itself was noisy so I tried the exact same machine with an electric motor,running off a generator outside.That was quiet inside the house,but the washer didn't do that great of a job.So I tried a round tub Maytag.Night and day difference,the round tub was 10 times the machine the old square tub was.I still have the round tub,it sits on the porch of a little house behind my main house.I use it to wash old sheets and such that I cover things with.


All times are GMT -5. The time now is 01:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.