The Ford Barn - K R Wilson oil groove cutter

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - K R Wilson oil groove cutter (https://www.fordbarn.com/forum/showthread.php?t=343627)

Shelbycsx

11-02-2024 04:39 PM

K R Wilson oil groove cutter

1 Attachment(s)

Finally got a set!

JayJay

11-02-2024 09:40 PM

Re: K R Wilson oil groove cutter

Quote:

Originally Posted by Shelbycsx (Post 2347632)

Finally got a set!

Deleted

Keith True

11-03-2024 08:17 AM

Re: K R Wilson oil groove cutter

I had a set of those years ago.I also had a set of molds with the grooves made into them.The machinest I got them from told me that he didn't like the molded grooves,he said he could see signs of the babbit pulling away from the edges of the grooves after it cooled.So,he always used the cutter.All the molded grooves I saw in rods always looked fine to me,much neater.I sold it all to somebody here about 20 years ago.

BRENT in 10-uh-C

11-03-2024 05:04 PM

Re: K R Wilson oil groove cutter

Quote:

Originally Posted by Shelbycsx (Post 2347632)

Finally got a set!

Congrats. The key on those (-or at least mine) is having the cutters properly sharpened with the correct undercut.

Will N

11-04-2024 10:42 AM

Re: K R Wilson oil groove cutter

Quote:

Originally Posted by JayJay (Post 2347691)

Deleted

Let me guess Jay, second thoughts about a joke you posted about getting a set? :p

All times are GMT -5. The time now is 12:57 PM.