The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Late V8 (1954+) (https://www.fordbarn.com/forum/forumdisplay.php?f=5)
-   -   1960 Thunderbird Cruise O Matic (https://www.fordbarn.com/forum/showthread.php?t=343160)

BW 10-16-2024 06:58 AM

1960 Thunderbird Cruise O Matic
 

Hi a friend has a 60 T Bird with a cruise o matic and it shifts to fast. Since 1960 had no modulator valve how you adjust this. I was thinking it's in linkage but I don't know how to do this. I have never mess with one before. Thanks BW

oldbugger 10-16-2024 10:00 AM

Re: 1960 Thunderbird Cruise O Matic
 

I had a few cruise o matics and all had a vacuum modulator valve, which could be adjusted. Bottom back driver side of the trans.

KULTULZ 10-16-2024 11:28 AM

Re: 1960 Thunderbird Cruise O Matic
 

The 60 BIRD has a mechanical linkage controlled throttle valve (1st year for modulator valve - 1961).

It is fairly complicated to adjust properly. You will need the 1960 BIRD WORKSHOP MANUAL.

BW 10-17-2024 06:28 AM

Re: 1960 Thunderbird Cruise O Matic
 

Thanks KULTULZ I will have him try to get one.

KULTULZ 10-17-2024 08:17 AM

Re: 1960 Thunderbird Cruise O Matic
 

TRY THIS - https://www.squarebirds.org/Manuals/...ShopManual.pdf

rotorwrench 10-17-2024 12:01 PM

Re: 1960 Thunderbird Cruise O Matic
 

It seems like the more the valve lever is pulled the harder the shifts. Lengthen the rod should ease up on the shift. Make small adjustments at a time and RECORD the number of turns so you can go back to what you had if it gets worse.

The more the lever is pulled the higher the shift pressure becomes. The throttle valve, or TV for short, controls the shift pressure. At high pressure, it signals downshift when you really press down on it.

KULTULZ 10-17-2024 08:45 PM

Re: 1960 Thunderbird Cruise O Matic
 

Good way to burn an otherwise good transmission.

BW 10-18-2024 06:16 AM

Re: 1960 Thunderbird Cruise O Matic
 

Thank you

KULTULZ 10-18-2024 06:20 AM

Re: 1960 Thunderbird Cruise O Matic
 

You're welcome ...


All times are GMT -5. The time now is 07:23 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.