47 door glass
 

Could someone tell how to adjust 47 car door glass ? My door glass has developed a hairline crack starting from the top of the window that fits into the channel. I see there are 2 rivet like steel pieces near the top of the channel was likely the cause of the it being crack or am I missing something.Any pictures of adjustment would be really great.

Re: 47 door glass
 

If the glass is hitting metal then that is most likely the cause of the crack. The 'whiskers" are probably worn and need replacement.

Re: 47 door glass
 

Thanks for the reply. There seems to be 2 small circle metal at the top channel that seem to do nothing, thinking off drilling one out and see what happens.

Re: 47 door glass
 

I find it hard to believe that no one knows how to adjust a window door glass on a 47 car.
I can't find much in the search section either. I guess it's trial and error.

Re: 47 door glass
 

It's unclear to me how much adjusting is really possible on the 41-48 model side glass.

Re: 47 door glass
 

When I wind up the glass,it seems to get force towards the vent window and binds.So I thought there must be some adjustment.

Re: 47 door glass
 

That would suggest to me that the vent window channel isn't fully aligned.

Re: 47 door glass
 

I did not think of that !! I guess I am getting old. Thanks I'll try that.

Re: 47 door glass
 

Well, I couldn't move the side rail any further to allow more room for the glass.
Plan B, I guess