Cowl light assembly
 

I am installing the turn signal kit to my cowl lights, and cannot find a sketch of the bucket assembly. What is the correct position of the gasket---under the reflector, under the lens, or under the outer rim ?

Re: Cowl light assembly
 

Under rim like your headlights.

Re: Cowl light assembly
 

Under rim like your headlights.Goes on front of reflector.

Re: Cowl light assembly
 

Between reflector and lens to keep the bulb dry, both cowl and head lights.

Re: Cowl light assembly
 

Snyders says between outer stainless rim and lens if read correctly, not between lens and reflector. The gasket on the reflector would ride on the lens clips if the latter position ?

Re: Cowl light assembly
 

I stand by my previous statement. Otherwise there could be leakage between lens and reflector. Same for the tail light, although the cross bar on that gasket does nothing.