33 hood rubbers
 

Do the hood runners go on the outside like this, it seems like it as the recess for the rivet fits nice
If the rubber is fitted on the inside the rivet is on the paint
Lawrie

Re: 33 hood rubbers
 

You have it on the wrong side of the hood side panel. The one in your photo belongs on the right side hood panel. If it does not have a steel insert to give it body like the original, it is near worthless. The Bob Drake versions are/were as original.

Re: 33 hood rubbers
 

https://www.fordbarn.com/forum/attac...p;d=1718841892

1933 Ford Hood Rubber:- You have it on the wrong side of the hood side panel. The one in your photo belongs on the right side hood panel. If it does not have a steel insert to give it body like the original, it is near worthless. The Bob Drake versions are/were as original. DavidG

Re: 33 hood rubbers
 

Thanks David, I though so.
is there a supplier of them with the steel insert, I bought these and they were listed as such ,but only the rubber.
Lawrie

Re: 33 hood rubbers
 

I got mine from MAC's awhile back...

Re: 33 hood rubbers
 

They (as part of a 14 piece '33-'34 hood bumper kit) are listed as in stock in the current Bob Drake online catalog.

Re: 33 hood rubbers
 

on a different subject,
The Grille and Cowl welting for the Hood, in the image above it shows a channel in the middle and the colour is sandy beige, does any one have a source for this material, I have the vintique stuff but it does not have the channel and is a very dark brown
thanks in advance

my 38 has the cowl welting as per Lawrie's image on his 33

Re: 33 hood rubbers
 

David, It is very hard to buy from Bob drake , it used to be easy, the last few items I priced out art $41 and freight at $257
I t would be nice if I could get them from him or some who's freight is not excessive.
Lawrie

Re: 33 hood rubbers
 

Try thirdgenauto.com. Michael stocks some Drake items or may have another source for the steel-reinforced hood side panel corner rubber bumpers.