How to start a '28 Ford Model "A" the "Old-Time Way"
 

How to start a '28 Ford Model "A" the old time way.
From Stoney Lonesome Productions™ and Thanks for watching!

https://vimeo.com/435389638

Stoney Lonesome Productions™
short,comic,reel,WATCH...Old-Time,silent moving pictures:
https://vimeo.com/channels/stoneylonesome

Re: How to start a '28 Ford Model "A" the "Old-Time Way"
 

I guess thats why my A wont start, I am not waring those fancy gloves.:confused:

Re: How to start a '28 Ford Model "A" the "Old-Time Way"
 

Nice truck.

Re: How to start a '28 Ford Model "A" the "Old-Time Way"
 

While I am not a proponent of using two hands, I do think it is worth mentioning that everyone should take note of this "Cranker's" hand position. If the engine were to 'kick', it should be able to release from his hands suddenly without jerking a thumb off.

One other thing that I learned the hard way that ultimately caused me to have Rotator Cuff surgery on my cranking arm is that the technique should not be to jerk the crank quickly thru rotation, but just to pull slowly and steady past the piston cycle. Since the cranking stroke is generally ¼ of a turn -or one piston compression cycle, then there is not any advantage to jerking it quickly. This is why even petite ladies back in the day were capable of hand-cranking a Model-A (or Model-T) engine.

Re: How to start a '28 Ford Model "A" the "Old-Time Way"
 

Not sure what the choke did for him since he pull and released it??

Re: How to start a '28 Ford Model "A" the "Old-Time Way"
 

Sometimes starting the Ts at Greenfield Village I have to give the choke a 'blip' while it's cranking and then they will fire right up. It's usually when it's been cranked and started then died.

Very Respectfully,

jason

How to start a '28 Ford Model "A" the "Old-Time Way"
 

I’ve never tried hand cranking our car cold (I never really thought about that until now), but I usually have to blip the choke when using the electric starter when the car is cold. After the engine is warm, I can hand crank it without choking. Brent is right for our car. A slow crank of about a 1/4 rotation is usually all it takes.

We are blessed. Our car has always started easily.


Sent from my iPhone using Tapatalk

Re: How to start a '28 Ford Model "A" the "Old-Time Way"
 

This is how that is ACTUALLY done- https://youtu.be/8EWDRHC2dzg?feature=shared&t=127

Re: How to start a '28 Ford Model "A" the "Old-Time Way"
 

I would agree IF the ignition was on and the engine was turning over! All he did in the video is say "choke on" and pull and release.