'39 wire control dash knobs ??
 

My '39 dlx has those wire push/pull controls for choke/throttle. Would like replacement, but not made. Solution?? go to '40 rod style or rebuild the wire type. replace the knobs?? What have you fellows done? Newc

Re: '39 wire control dash knobs ??
 

Newc, what you have is the early style. No doubt, you knew that.
I too had that style on the wagon I'd restored. I rebuilt what I had. Easy enough.
I bought the choke cable at the local tractor supply store. It's available by the foot.
Amazon also sells it if that's easier for you to source.

Re: '39 wire control dash knobs ??
 

Kube, could you give a brief description of what/how you did this. I've had this situation come along on several old car and truck resurrections . Tim

Re: '39 wire control dash knobs ??
 

The end at the carburetor I had slipped the "ball and spring" over the wire and soldered a "cup" at the end of the wire. Used a ball end mill to shape it nicely. Worked quite well and smoothly.