The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Condenser wire (https://www.fordbarn.com/forum/showthread.php?t=338175)

Tom F OHIO 05-01-2024 11:35 AM

Condenser wire
 

When you connect the wire for the condenser on a modern upper plate does it matter where it fastens on? Does anyone have a close up picture where you have yours fastened at the points block

jg61hawk 05-01-2024 06:25 PM

Re: Condenser wire
 

3 Attachment(s)
Here are my pictures.... I have the modern plate with the little brass thing that goes to the lower plate... Hope it is what you wanted.

jg61hawk 05-01-2024 06:30 PM

Re: Condenser wire
 

In reviewing my photos... I may have have over lubricated the cam! Ha...it runs like a new car....

Tom F OHIO 05-02-2024 08:23 AM

Re: Condenser wire
 

Thanks alot jg. Those pictures were what I wanted to see.


All times are GMT -5. The time now is 10:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.