Carb Rebuild
 

Gentleman, Does anyone know of the guy in New York that rebuilds the carb on a 33 model 40? I believe it is a Rochester
Thank You

Re: Carb Rebuild
 

Contact Charlie NY, 716-662-9159 Western part of NY, he rebuilt my carb plus lots of others on this forum.

Re: Carb Rebuild
 

Or Uncle Max, Stromberg wiz. He is allowed to post on here. Probably will chime in. Uncle Max, to the courtesy phone!

Re: Carb Rebuild
 

Charlie Schwindler in Orchard Park, NY The Carb is a Detroit Lubricator?

Re: Carb Rebuild
 

My bad, assumed the Model 40 referred to carb.

Re: Carb Rebuild
 

Yes it is a DL

Re: Carb Rebuild
 

Thank You !

Re: Carb Rebuild
 

Thank You

Re: Carb Rebuild
 

All Good !

Re: Carb Rebuild
 

Stromberg also made a model 40 duel downdraft carburetor used on the 34 Ford V8.

Re: Carb Rebuild
 

I believe that was the Stromberg 48.

Sal

Re: Carb Rebuild
 

Re: Carb Rebuild
 

In 34 Ford used both the 40 and 48. The two Carbs were identical in outward appearance, with the difference being the inside of the top and center sections. At sometime near 35 Ford had Stromberg mark the die casting "48" to distinguish Ford Carbs from Carbs used by other car Mfg. due to Fords rebuilding program.

Re: Carb Rebuild
 

I thought 40 was the model of the car, and 48 was the first Stromberg 3 bolt two barrel in '34.
Pretty sure '33 and '34 Ford cars were model 40's.

Sal

Re: Carb Rebuild
 

carbs.
The "40" designation came from the Ford part number prefix for 1934 automobiles. The 40's are very similar to 48's with the exception of the upper idle channel circuits. Outwardly, it's near impossible to tell the difference.
______________
This partial quote is from none other than Uncle Max. It was from a few years ago.

Re: Carb Rebuild
 

That's a new one on me.

Sal