Diameter of 40 front anti-roll bar
 

As the title says, I'm needing to know what the diameter of the stock front anti-roll bar on a 40 pass. car. Thanks, Ron

Re: Diameter of 40 front anti-roll bar
 

My pickup is still out in Oregon but I did just finish painting all my front end parts a week ago and I'm fairly certain it is 3/4". Tim

Re: Diameter of 40 front anti-roll bar
 

Thank you, sir. That's what I was thinking, but I wasn't sure.

Re: Diameter of 40 front anti-roll bar
 

Just went and measured mine. It's 3/4 inch dia. Part # 3535-B. It cost $5 new according to the parts book, page 42.

Re: Diameter of 40 front anti-roll bar
 

Thank you so much.

Re: Diameter of 40 front anti-roll bar
 

https://www.fordbarn.com/forum/attac...6&d=1707669376

https://www.fordbarn.com/forum/attac...4&d=1707670783

https://www.fordbarn.com/forum/attac...8&d=1707669434

https://www.fordbarn.com/forum/attac...2&d=1707670694