Original 1932 pedal assembly
 

Hello all. I am desperately looking for a set of original 1932 pedals. If not the pedals at least the mounting bracket. I am mechanically restoring my father-in-law's 32 Sport Coupe and found that the previous "Mechanic/Restoration Shop" cut the mounting bracket and used a hydraulic master cylinder I am not familiar with. I'm not sure I will be able to rebuild this setup and want to make it easy for my kids should they need to rebuild it in the future. The K member is still intact and I would like to keep it that way.

ANY help is GREATLY appreciated!!!

DK

Re: Original 1932 pedal assembly
 

Place an ad in the Early V8 wanted section

Re: Original 1932 pedal assembly
 

Will do

Re: Original 1932 pedal assembly
 

Check with Andy on here. He had some a while ago?

Re: Original 1932 pedal assembly
 

Is your intention to revert to the original mechanical brakes?

Re: Original 1932 pedal assembly
 

Several in the early V8 classified section

Re: Original 1932 pedal assembly
 

Nickthebandit the site won't let me respond via PM

330 686 0224

Dave Kimberly

Re: Original 1932 pedal assembly
 

cant send email address either

Re: Original 1932 pedal assembly
 

Cuz you are a new member here. To make it harder for internet scammers to respond to ads, this site won't let you respond until you have made 10 posts. Just make a few more dummy posts, then you should be able to respond.

Re: Original 1932 pedal assembly
 

If you end up keeping hydraulics (depending on how/where the car is going to be used it might be a good idea) here is how I did it using original pedals. Too bad your previous owners didn't't do it this way.

PS, You should put your general location in your profile.

Charlie Stephens

Re: Original 1932 pedal assembly
 

xxx

Re: Original 1932 pedal assembly
 

zzz

Re: Original 1932 pedal assembly
 

rrr

Re: Original 1932 pedal assembly
 

ttt

Re: Original 1932 pedal assembly
 

sorry about the posts

Re: Original 1932 pedal assembly
 

eeee

Re: Original 1932 pedal assembly
 

https://www.fordbarn.com/forum/attac...5&d=1701110531

https://www.fordbarn.com/forum/attac...6&d=1701110531

Re: Original 1932 pedal assembly
 

sss

Re: Original 1932 pedal assembly
 

IF you want to keep the existing hydraulic setup ("if it aint broke, dont fix it") you may be able to source the cylinders from a mainstream parts store IF there are casting numbers on said cylinders.