Polishing wheels for angle grinder
 

Has anyone had satisfactory results polishing metal
with the wool-felt wheels advertised on U-tube or Temu ???

Re: Polishing wheels for angle grinder
 

Depends on what condition the metal is in before you start. I use the wool-felt wheels with different rouges as final steps.

https://www.fordbarn.com/forum/showp...5&postcount=12

I use various abrasive nylon wheels for first and second passes. These wheels are good for getting into tight spots.

https://dicoproducts.com/products.php?gid=5

Another thread on polishing:

https://www.fordbarn.com/forum/showt...ight=polishing

Re: Polishing wheels for angle grinder
 

Great info
Thanks

Re: Polishing wheels for angle grinder
 

You must remember that angle grinders commonly turn at 8500 RPM, which will rapidly heat up your work. A polished surface can't hide a heat warped panel.