|
Victoria header Looks like I need a new wooden header (over windshield) for a '31 Victoria. Does classic wood still make them? Anybody have a good phone number for them?
TIA Dick |
Re: Victoria header They have a website and it shows stock status …
Ooops…doesn’t seem to open!! Snyder’s and Bert’s handles their wood. (336) 691-1344 |
Re: Victoria header Hey thanks
|
Re: Victoria header OK now that I found a new wooden header, how much of a job is it to change it out?
TIA Dick |
Re: Victoria header Pretty involved. The front cover is tack welded on the top side corners. Cutting wheel then weld back
Otherwise a bunch of screws |
Re: Victoria header 2 Attachment(s)
Fortunately, the header in my Victoria does not need replacement. However, looking at the way the header lays in the car, it appears that it was originally put in front the front. Without doing some metal chopping, I do not see a way to get the header out or in from inside the car.
|
Re: Victoria header Yes from the front…or top when header cover is removed…which has to be.
|
Re: Victoria header What should I use to coat the new header?
TIA Dick |
Re: Victoria header Just coat it with clear polyurethane spray…Ace Hdwe rattle can.
It’ll be there longer than us …even if young (which I’m not!) |
Re: Victoria header Thanks again
|
Re: Victoria header Hello, some previous posts have changing the header on a Slant Windshield, be similar, perhaps do a search.Hope this helps.
|
| All times are GMT -5. The time now is 11:15 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.