Machine Shop
 

Does anyone know of a reputable machine shop around middle TN that can rebuild a Model A engine? Can travel further if needed.

Re: Machine Shop
 

go see Brent...............

Re: Machine Shop
 

Brent Terry is probably your best bet. He's in Elizabethton? I believe.

I don't know if Michael Driscoll knows anyone, but he's on the western side.

Red

Re: Machine Shop
 

Thanks guys

Re: Machine Shop
 

Guys I appreciate recommending me however we are well over a year out with a bunch already here on the waiting list. There is a good engine builder named Dennis Plank over in the Humbolt area however I have no idea what his backlog is either. PM me if you need his contact information.

Re: Machine Shop
 

Contact Kevin Prus, Columbiana, OH

Re: Machine Shop
 

Anyone have any experience with the "new" Antique Engine Rebuilding? They're in Bluffton IN, which is a day's drive from central Tennessee.

Re: Machine Shop
 

I've been buying parts from them. They are also a year out on engine rebuilds.
I'm in Sonoma Ca. and 6mos. out on engines now. Have 16 going at this point.
Big hang up is parts something is always on back order it seems.

Re: Machine Shop
 

Amen!! :o

Re: Machine Shop
 

What are y'all finding to be most difficult to source right now? And I'm not talking about stuff we know isn't made anymore, I mean stuff that you intuitively think should be available but isn't.

Re: Machine Shop
 

Try Schwalms in Strasburg,PA. Put your engine on a pallet and ship it to them if they are not too far out.Sometimes they have exchange engines. They are in Hershey for the show right now.

Re: Machine Shop
 

Items out of stock right now, STD. Pistons, valves, oil pump kits and I've been waiting
since Jan. for a camshaft from Stipes. (It's a little bigger than the. Burtz cam)

It changes all the time....