The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Starter cable routing on a 36 Tudor (https://www.fordbarn.com/forum/showthread.php?t=328566)

dean333 07-09-2023 06:21 PM
Starter cable routing on a 36 Tudor
 

1 Attachment(s)
Does the cable from the starter to the floor switch pass between the firewall and throttle linkage or below the throttle linkage? The way in the photo causes the pedal linkage to hang up on the cable.

dean333 07-09-2023 06:28 PM
Re: Starter cable routing on a 36 Tudor
 

After looking at the photo on p.112 of the 35-36 restoration manual and orienting it with my photo in relation to the sending unit, I need to flip the rubber bracket over. That will pull the cable away from the linkage.

34fordy 07-09-2023 07:08 PM
Re: Starter cable routing on a 36 Tudor
 

Quote:
Originally Posted by dean333 (Post 2239231)
Does the cable from the starter to the floor switch pass between the firewall and throttle linkage or below the throttle linkage? The way in the photo causes the pedal linkage to hang up on the cable.
I thought this was a 1/4" NPT opening into the oil galley?

dean333 07-09-2023 07:47 PM
Re: Starter cable routing on a 36 Tudor
 

1 Attachment(s)
The cable passes between the linkage and the engine. I flipped the rubber sleeve over so it holds the cable AWAY from the linkage.

petehoovie 07-09-2023 07:55 PM
Re: Starter cable routing on a 36 Tudor
 

Quote:
Originally Posted by dean333 (Post 2239263)
The cable passes between the linkage and the engine. I flipped the rubber sleeve over so it holds the cable AWAY from the linkage.
https://www.fordbarn.com/forum/attac...5&d=1688944885

petehoovie 07-09-2023 07:56 PM
Re: Starter cable routing on a 36 Tudor
 

Quote:
Originally Posted by dean333 (Post 2239263)
The cable passes between the linkage and the engine. I flipped the rubber sleeve over so it holds the cable AWAY from the linkage.
https://www.fordbarn.com/forum/attac...3&d=1688950037

JM 35 Sedan 07-09-2023 11:47 PM
Re: Starter cable routing on a 36 Tudor
 

Quote:
Originally Posted by petehoovie (Post 2239267)
That's the way it should be attached.

deuce lover 07-10-2023 04:21 AM
Re: Starter cable routing on a 36 Tudor
 

'''

Planojc 07-10-2023 10:03 AM
Re: Starter cable routing on a 36 Tudor
 

I wish that some of my car problems could be resolved that easy.


All times are GMT -5. The time now is 03:50 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.