![]() |
Repurposing Model "A" Wheels I have some non-usable Model "A" wheels that I want to repurpose. Please post pictures of what can be done to repurpose these wheels.
|
Re: Repurposing Model "A" Wheels I use them on the ends of my culverts to keep the larger critters and debris out of them.
|
Re: Repurposing Model "A" Wheels No ideas, but remember they are not flat on the bolt pattern.
|
Re: Repurposing Model "A" Wheels Quote:
|
Re: Repurposing Model "A" Wheels Have one hanging on outside wall of garage with 100 ft electric cord around it.
also good for outdoor umbrella stand base. |
Re: Repurposing Model "A" Wheels Set up 19" wheel for a hose rack but it didn't hold enough hose.Took a 21" wheel & cut the rolled edges at the same diameter as the outside edge of the 19" & welded them together. Now it will hold a 50' garden hose. Cut a hole in the 19" hub cap 7 snapped in the 21" hub cap. Looks great but take a while to figure out what you're seeing. Now I want to make two more for the back of my '28 roadster pickup but can't find any 7.00 x 21" tires!
|
Re: Repurposing Model "A" Wheels Contact your local ski area. Many use them for rope wheels on rope tow ski lifts.
|
Re: Repurposing Model "A" Wheels 1 Attachment(s)
|
Re: Repurposing Model "A" Wheels Wello,
That's interesting as I have a 20" AA wire wheel for my mailbox post. Red |
Re: Repurposing Model "A" Wheels Wall Art
|
Re: Repurposing Model "A" Wheels My Grandfather used them for dead men to hold up the retaining wall at our cabin.
Still working after 89 years. |
Re: Repurposing Model "A" Wheels 1 Attachment(s)
|
Re: Repurposing Model "A" Wheels Ok, window grill is my favorite.....
|
Re: Repurposing Model "A" Wheels I was considering making 2 wheels into battery operated wall clocks, but they would be very heavy.
|
Re: Repurposing Model "A" Wheels I've seen them used as garden hose holders.
Paul in CT |
Re: Repurposing Model "A" Wheels 1 Attachment(s)
Quote:
....like this one for example: https://www.fordbarn.com/forum/attac...1&d=1687164873 Brad in Maryland |
Re: Repurposing Model "A" Wheels I've been using a rusty old 19" rim to drape a garden hose over for years and years.
|
Re: Repurposing Model "A" Wheels I have wanted one to re-purpose into a clock
|
| All times are GMT -5. The time now is 04:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.