![]() |
Tire Rod Hello guys! I would like to tighten my tire Rod asap it is a bit sloppy.
Will I have to remove the brake assembly/backing plate ti accomplish This? |
Re: Tire Rod Tire rod? Tie rod?
|
Re: Tire Rod deleted
|
Re: Tire Rod It explains it very thoroughly in the Les Andrews book. Please make sure you have a good method and measuring tools to avoid a bad result. No, nothing needs to be removed.
|
Re: Tire Rod After you tighten the rod you will need to do an alignment toe in check.
|
Re: Tire Rod 1 Attachment(s)
This may help you:
|
Re: Tire Rod Thanks everyone I’ll get at it asap…
|
All times are GMT -5. The time now is 10:21 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.