8ba anti chatter rod brackets
 

Is anyone still making (for sale) the anti chatter rod BRACKETS for the 8ba flatheads when installed in earlier cars, like a 1932?

Re: 8ba anti chatter rod brackets
 

I had to make mine
used a threaded rod with a nut welded to the end for the frame connection
nuts, washers and a bit of pipe as a spacer for the motor side.

Re: 8ba anti chatter rod brackets
 

What are the anti chatter rods?

Re: 8ba anti chatter rod brackets
 

Never mind.

Re: 8ba anti chatter rod brackets
 

Used to be a guy who advertised them on eBay. Haven't checked in a while. I made some for the 8ba in my '39 p/u but the ones on eBay were much nicer looking.

Re: 8ba anti chatter rod brackets
 

From an older post:


UPDATE:
I just talked to Mark Seitz today, April 5, 2020. His correct phone number is 234-600-8804 and he charges $60 which includes shipping for a pair of his brackets.

His address is the same:

5345 Parkman Road NW,

Warren,OH 44481
https://www.fordbarn.com/forum/hamb/...er_offline.gif https://www.fordbarn.com/forum/hamb/buttons/report.gif https://www.fordbarn.com/forum/hamb/buttons/quote.gif

Re: 8ba anti chatter rod brackets
 

Thank you 51504Bat

Re: 8ba anti chatter rod brackets
 

Let us know if he's still selling them.

Re: 8ba anti chatter rod brackets
 

Yes he is still making them

Re: 8ba anti chatter rod brackets
 

I just laser cut about a dozen brackets over the weekend. I've got them tumbling right now. I've made many sets of these for guys and recently thought to add them to the website rather than as a special order item.

Re: 8ba anti chatter rod brackets
 

Can you send me info and pics? I have an 8ba in a 36 Ford Cabriolet. Price and availability?

Re: 8ba anti chatter rod brackets
 

Here is a picture of the brackets I’ve made. These work with both the cast and the stamped bellhousings. The main bracket is laser cut from 1/2” steel and they include laser cut 1/4” spacers so you don’t have to modify your rods. I plan to add these to the website this week when time allows. Feel free to PM me for more info, or reach out to me on my website.

Thanks

Re: 8ba anti chatter rod brackets
 

Re: 8ba anti chatter rod brackets
 

I received my brackets from Mark Seitz and they look great. $60 shipped. Can't wait to install them.

Re: 8ba anti chatter rod brackets
 

Very nice work. Well done!

Re: 8ba anti chatter rod brackets
 

Recently received a set of brackets for my 8ba from Mark Seitz . Very nice workmanship. I'll do the install this winter.