Marvel Schebler Carb Decals
 

I posted this on the Swap Meet forum about recreating some decals on the Marvel carbs, so I am reposting it here too.
I was able, as a retired graphic designer, to reconstruct a few versions.

I'm guessing you can copy or download the PDF file below.
You can then get decal paper (search the internet) to make your own decals or labels.

All the best, The Geezer

Re: Marvel Schebler Carb Decals
 

https://www.fordbarn.com/forum/attac...p;d=1670730395

Marvel Schebler Carb Decals by "The Geezer"

Re: Marvel Schebler Carb Decals
 

Just so you all are aware, the decal in the top, third and sixth rows (the ones where "Carburetor" is spelled correctly) is not a true Marvel Schebler decal but a decal I drew up to put on my carburetors. I never meant them to pass as real on other's Marvels.

https://www.fordbarn.com/forum/attac...2&d=1670737052

https://www.fordbarn.com/forum/attac...3&d=1670737052

Re: Marvel Schebler Carb Decals
 

So...correct Marvel decal spelling would be carbureter, not carburetor? Took me a while to spot this even after your hint. Was it a geographical issue?

Re: Marvel Schebler Carb Decals
 

Sorry, I thought it was correct...at least I mean't well. Any who want to use them are welcome to.
The Geezer

Re: Marvel Schebler Carb Decals
 

No the misspelled ones are the "carbureter" ones. Carburetor in my decal is spelled correctly. Sorry for the confusion.

Not a problem. Good to see my faux decal is good enough to pass as an original, haha. Now that I see what a real decal looks like, I may improve mine. Thanks for posting the Allstate and Johnston decals.

https://www.fordbarn.com/forum/attac...4&d=1670780163

Re: Marvel Schebler Carb Decals
 

Decal that was on my NOS Allstate Marvel

Re: Marvel Schebler Carb Decals
 

Thanks to The Geezer for his decal work my Marvel carburetor looks almost like a new carburetor.

Re: Marvel Schebler Carb Decals
 

Just a FYI the word carburetor is misspelled on the original Henry ford blueprints.

Re: Marvel Schebler Carb Decals
 

Great work, thanks for sharing these! We may just put one on ours