The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   1930 Murray Exterior Door Key (https://www.fordbarn.com/forum/showthread.php?t=319945)

GT1929 10-30-2022 11:31 PM

1930 Murray Exterior Door Key
 

Have remove lock and there is a number on the shaft No. A1102.
Don't know if this is key number?
If so can I get a new key?

shew01 10-31-2022 04:06 AM

Re: 1930 Murray Exterior Door Key
 

Dick Crabtree does excellent work.

POB 33
Pickstown SD 57367
US

(605) 487-7229


Sent from my iPhone using Tapatalk

Afordman31 10-31-2022 07:19 AM

Re: 1930 Murray Exterior Door Key
 

I had a ignition lock with the A**** number and took it to a lock shop and they looked it up on their cards and made me a key right away. Try a lock shop and you should have success.

GT1929 10-31-2022 03:21 PM

Re: 1930 Murray Exterior Door Key
 

Quote:

Originally Posted by shew01 (Post 2177804)
Dick Crabtree does excellent work.

POB 33
Pickstown SD 57367
US

(605) 487-7229


Sent from my iPhone using Tapatalk

Thanks will try a lock shop, I'm in New Zealand

GT1929 10-31-2022 11:47 PM

Re: 1930 Murray Exterior Door Key
 

Hello, Had local Locksmith make two keys for this outside door lock bit of trouble installing it until I put a wire though lock and into shaft end which help line the shaft up when pushing lock into door. Lock now works as it should.

Synchro909 11-01-2022 12:48 AM

Re: 1930 Murray Exterior Door Key
 

Quote:

Originally Posted by GT1929 (Post 2178036)
Hello, Had local Locksmith make two keys for this outside door lock bit of trouble installing it until I put a wire though lock and into shaft end which help line the shaft up when pushing lock into door. Lock now works as it should.

You were lucky they had a blank.

GT1929 11-01-2022 01:41 AM

Re: 1930 Murray Exterior Door Key
 

Synchro909,

Didn't seem to be a problem asked how many keys I wanted.
Cheers Graeme

shew01 11-01-2022 04:23 AM

Re: 1930 Murray Exterior Door Key
 

Quote:

Originally Posted by Synchro909 (Post 2178042)
You were lucky they had a blank.


Agreed. I had a key and just wanted a duplicate made so I would have a spare. Our best lock shop in the area didn’t have a way to get a blank. They butchered a similar key blank and fudged it enough to make it work. It was an ugly mess.


Sent from my iPhone using Tapatalk


All times are GMT -5. The time now is 08:32 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.