![]() |
Clutch adjustment Should I put loc tite on the 6 adjusting nuts after adjustment?
Thanks Dick |
Re: Clutch adjustment Its wouldn't hurt. I just stake them.
|
Re: Clutch adjustment Please explain stake them.
Thanks Di |
Re: Clutch adjustment Just take a small chisel, put the edge against a thread, hit it with a hammer to 'warp' the thread against the nut so it can't turn on its own.
|
Re: Clutch adjustment You can stake them or you can use the green lock tight which will actually wick down into the threads that's what I used on mine.
|
All times are GMT -5. The time now is 01:17 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.