Fender brackets 35-36
 

Are 35-36 bumper brackets the same?
I edited this but the title is still wrong, bumper not fender

Re: Fender brackets 35-36
 

I do not believe so. Are you working on a 35’ or 36’ ?
When I get to shop tomorrow morning, I can look in 35/36’ book.
35’ Deluxe is up on Lift , I can take pics if will help you out ?
Stretch

Re: Fender brackets 35-36
 

Passenger car or commercial?

Re: Fender brackets 35-36
 

Passenger car 36 five window
Was offered a set from a 35 rear bumper.
I think I made an error in the description. Bumper brackets

Re: Fender brackets 35-36
 

36's are different. have some in Oregon. Newc

Re: Fender brackets 35-36
 

'35 and '36 front inner brackets are the same. Front outer brackets and rear brackets are different. '35 front outer and rear are straight; '36 front outer and rear bend down.

Re: Fender brackets 35-36
 

35 and 36 bumpers are different (fold over ends have different angles)hence the difference in the brackets. V8ER is correct in his description.

Re: Fender brackets 35-36
 

I picked up a bumper at a swap. How do I tell the difference from a 35 and 36 bumper?

Re: Fender brackets 35-36
 

The '36 fold over at the end is almost a 45 degree .Post a picture of the fold over end and I will tell you unless you have the 35-36 restoration book which shows it..
Here is a pic of a '35 & '36 I found by Googling

Re: Fender brackets 35-36
 

Here’s what I got. 36 I think

Re: Fender brackets 35-36
 

Looks like '36.In the second pic you can see the bumper arm curving down at the end.

Re: Fender brackets 35-36
 

And two holes in the bracket means it is for the right front.

Re: Fender brackets 35-36
 

Cool thanks