Display engine. 15.5 in diameter fan with 2 in hub needed.
 

EDIT:

I HAVE DETERMINED THE FAN I NEED HAS A 4 1/8" HUB. NOT 2" PART # 73-8600

I've gotten so into correctness for the 60HP display engine that I want to be absolutely correct on everything if at all possible. I understand the correct fan has a 2 inch hub. Someone correct me if I'm wrong. So, does anyone have a nice 2" hub fan. I have a very nice fan with a 2.5" hub I can trade if interested. With this going to the Ford Foundation I am certain donations would be tax deductible, even if not, donations would be greatly appreciated. If 'ya gotta have money, how much? Lawson

Re: Display engine. 15.5 in diameter fan with 2 in hub needed.
 

Lawson, I can't recall... 39 or 40 engine?

Re: Display engine. 15.5 in diameter fan with 2 in hub needed.
 

39 Oh. I've got questions on the starter. Strange stuff done to it. Give me your direct email and I'll send you a couple of pictures. My email is [email protected].

Re: Display engine. 15.5 in diameter fan with 2 in hub needed.
 

It's quite easy to send pictures via PM. Coop


https://www.fordbarn.com/forum/image...ine=1285968363

Re: Display engine. 15.5 in diameter fan with 2 in hub needed.
 

Coop. Never tried that. I'll have to give it a shot.

Re: Display engine. 15.5 in diameter fan with 2 in hub needed.
 

My pix are in my computer only. Not stored on website. Probably a bad practice.

Re: Display engine. 15.5 in diameter fan with 2 in hub needed.
 

Lawson, I have a nice 4 blade fan. 2" hub length but it measures 15 3/4" in dia. Nice bright "Ford" red but I could blast it and paint it black.

Re: Display engine. 15.5 in diameter fan with 2 in hub needed.
 

Bill: I certainly appreciate the offer. That's a beautiful fan. 1/4 inch difference in diameter would probably not be as noticeable as 1/2 inch difference in length of hub I don't believe. However, the wanted notice has not been up very long so I'll hold off on taking you up on your offer. Just asking though, what would you want for the repainted fan or would you be willing to donate it to the project?

Re: Display engine. 15.5 in diameter fan with 2 in hub needed.
 

NP Lawson, if you need it I'd be willing to donate it.

Re: Display engine. 15.5 in diameter fan with 2 in hub needed.
 

Thanks Bill, I'll keep that in mind, and I really appreciate it. Lawson

Re: Display engine. 15.5 in diameter fan with 2 in hub needed.
 

I have the correct one that you can have.

Re: Display engine. 15.5 in diameter fan with 2 in hub needed.
 

raybee: I have amended the original heading. Pull up original message to see the edit. Do you have the 4 1/8" hub I find I need?