The Ford Barn - Adjusting clutch fingers

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)

- - Adjusting clutch fingers (https://www.fordbarn.com/forum/showthread.php?t=311964)

rally 1

04-09-2022 03:41 AM

Adjusting clutch fingers

Getting ready to bench adjust clutch.
Original pressure plate, original flywheel, replacement disc (measures .380”)

Reading most of the threads on this subject, as well as watching YouTube videos, I see the dimensions of 5/8”, 11/16”, 3/4” used.
Les Andrews book says 5/8”

Considering that the disc is new, I’m planning to use the 5/8” dimension.
Is this correct?

Thanks
Ken

Fullraceflathead

04-09-2022 05:54 AM

Re: Adjusting clutch fingers

Yes

1931 flamingo

04-09-2022 06:39 AM

Re: Adjusting clutch fingers

I believe those measurements are WITH the P/Plate bolted to the flywheel...............
Paul in CT

rally 1

04-09-2022 06:52 AM

Re: Adjusting clutch fingers

Yes, plate bolted to flywheel

All times are GMT -5. The time now is 04:00 PM.