The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   32 cabriolet door windows (https://www.fordbarn.com/forum/showthread.php?t=311830)

my4dv8 04-04-2022 02:46 PM

32 cabriolet door windows
 

Hi , on our 32 cabriolet the previous owner said the door windows rattled when up. His fix was a “U” shaped piece of wood on the B pillar which requires the window to be down when opening or closing the door ,not ideal . Is there supposed to be rubber seals in the door top ? Or some sort of seal on the A or B pillar to steady the windows. Any pictures or input would be great.

DavidG 04-04-2022 05:58 PM

Re: 32 cabriolet door windows
 

2 Attachment(s)
Originally, the felt-covered rubber weather seals in chrome-plated or stainless steel channels on the A and B pillars were enough to prevent the window from rattling, assuming that there isn't excessive wear in the window run channels in the doors. (There was only a flap of the top material along the top of the window frame which did not contribute to rattle prevention.)

my4dv8 04-04-2022 06:42 PM

Re: 32 cabriolet door windows
 

Thanks David. Who would be a vendor for the felt-covered rubber weather seals in chrome-plated or stainless steel channels. Good point I will check the window runner channel felts in the doors also.

DavidG 04-04-2022 08:51 PM

Re: 32 cabriolet door windows
 

Bob Drake's catalog shows the stainless steel channels, but I did not see the rubber inserts or the felt covering tape therein. Carpenter used to carry the parts as well, but I found nothing in their current online catalog. Try thirdgenauto.com.

petehoovie 04-04-2022 09:38 PM

Re: 32 cabriolet door windows
 

Quote:

Originally Posted by my4dv8 (Post 2118877)
Thanks David. Who would be a vendor for the felt-covered rubber weather seals in chrome-plated or stainless steel channels. Good point I will check the window runner channel felts in the doors also.

https://www.fordbarn.com/forum/attac...6&d=1649112177

https://www.fordbarn.com/forum/attac...7&d=1649112177

deuce lover 04-05-2022 02:54 AM

Re: 32 cabriolet door windows
 

Off topic but please tell us about those '32 roadsters in the background.Orig NZ V8 or 4 cyl cars? Thanks

Graham Freeman 04-05-2022 04:11 AM

Re: 32 cabriolet door windows
 

Be careful when purchasing the channels/rubber from the above suppliers.
These channels are similar to 1933/34.
The reproduction channels are accurate but the rubbers supposedly for them when inserted are too narrow.
I tried from both suppliers when restoring my 34 cabriolet and found this out.
My problem was solved when I was able to purchase the correct width inserts from the Early Ford Store in CA.
These rubbers even have the correct felt like finish (although not very durable).

DavidG 04-05-2022 04:36 AM

Re: 32 cabriolet door windows
 

Sheldon,


Not NZ, but rather USA. On the left is Mark Moriarity's V8 and on the right is the ex-Pat Fenner/ex-Par McFarland (RIP) Model B.

deuce lover 04-05-2022 05:46 AM

Re: 32 cabriolet door windows
 

Ah,okay.Thanks

Pat/Ohio 04-05-2022 07:57 AM

Re: 32 cabriolet door windows
 

Quote:

Originally Posted by DavidG (Post 2118949)
Sheldon,


Not NZ, but rather USA. On the left is Mark Moriarity's V8 and on the right is the ex-Pat Fenner/ex-Par McFarland (RIP) Model B.

David....I thought I recognized the Model B roadster in the background! I see Pat M's roadster is now located at the Early Ford V-8 Foundation Museum. Thanks for posting! Kinda tugs at the tear glands a little!

Stay Safe,
Pat

VeryTangled 04-05-2022 09:15 AM

Re: 32 cabriolet door windows
 

Quote:

Originally Posted by deuce lover (Post 2118940)
Off topic but please tell us about those '32 roadsters in the background.Orig NZ V8 or 4 cyl cars? Thanks

I see I'm late with this.

Those photos look like they were taken in Gettysburg. They look like Mark Moriarty's and Pat McFarland's (sp?). Mark's is a V8 and Pat's is a 4.

DavidG 04-05-2022 09:22 AM

Re: 32 cabriolet door windows
 

Correct, the location was one of the Eastern National Meets held at Gettysburg, PA.

DavidG 04-05-2022 09:24 AM

Re: 32 cabriolet door windows
 

Pat,


I understand that Pat's other '32 roadster has a new home in Michigan along side my avatar, which is no longer mine.

Planojc 04-07-2022 09:54 AM

Re: 32 cabriolet door windows
 

I'm not sure where I purchased the stainless channels and rubber but the package for the rubber says that it came from Dale's Manufacturing Co. in Oklahoma City. It is called Convertible window rubber moulding #18-45983. 1932-39. Dale's may be wholesale only but they should be able to tell you where to buy it. Phone 405-631-8988

BoxCar Tom 04-07-2022 04:10 PM

Re: 32 cabriolet door windows
 

Is that Gene Hetland (RIP) with his back to the camera?

DavidG 04-07-2022 04:25 PM

Re: 32 cabriolet door windows
 

No, he was not in attendance at either of the Eastern National Meets held at Gettysburg.

my4dv8 02-26-2023 07:13 PM

Re: 32 cabriolet door windows
 

Scanned through third gen ,drake and carpenter but found none of the steel “U” channels to hold the window seals. Maybe my search was inadequate?

DavidG 02-26-2023 09:33 PM

Re: 32 cabriolet door windows
 

I checked last week and both the stainless steel channels and the rubber weatherstrips were in the Drake online catalog as well as fuzzy cloth tape covering. I searched with "convertible weatherstrips" and narrowed it down from there.

my4dv8 02-26-2023 10:23 PM

Re: 32 cabriolet door windows
 

Thanks David . Typical back order Bob ,it says unavailable , well the channel anyway. He did have the rubber. But using his SKU number lead me other sources.

Terry,OH 02-27-2023 10:39 AM

Re: 32 cabriolet door windows
 

The last time I bought the rubber from Drake it was already covered with the felt.


All times are GMT -5. The time now is 01:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.