The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   1931 pickup license plates (https://www.fordbarn.com/forum/showthread.php?t=309832)

31A/26T 02-09-2022 05:02 PM

1931 pickup license plates
 

Would a 1931 Model A pickup use standard license plates or commercial? Thank you.

LeonardS 02-09-2022 05:10 PM

Re: 1931 pickup license plates
 

I think it depends on what State plate you are working with.

31A/26T 02-09-2022 05:12 PM

Re: 1931 pickup license plates
 

Michigan

Gary WA 02-09-2022 05:17 PM

Re: 1931 pickup license plates
 

Washington is Commercial

McMimmcs 02-09-2022 05:27 PM

Re: 1931 pickup license plates
 

Quote:

Originally Posted by 31A/26T (Post 2103123)
Michigan

My 1929 pickup came from Michigan and it had a commercial plate.

LeonardS 02-09-2022 05:33 PM

Re: 1931 pickup license plates
 

I was able to find 1931 Michigan Commercial plates online, so I’m guessing you should have a Commercial plate.

ed thibodeau 02-09-2022 05:45 PM

Re: 1931 pickup license plates
 

I and a number of my friends have pickups in Michigan and use standard plates.

Gene F 02-09-2022 06:15 PM

Re: 1931 pickup license plates
 

I hear you can get new vintage plates made rather than trying to restore, or pay a lot of money for one that needs a ton of work.

Tom Endy 02-09-2022 06:24 PM

Re: 1931 pickup license plates
 

In California there is a DMV statute that exempts Model A commercial vehicles. including pick-ups, from being required to have commercial plates.

However, if you go to a California DMV office more than likely they will tell you that you need to have commercial plates and will send you off to have the vehicle weighed.

For that reason, you need to take the attached document with you when you go to the DVM to be able to educate them. It is also best to carry the document in the pick-up in case a cop stops you and says you need to have commercial plates.

Tom Endy

http://www.santaanitaas.org/wp-conte...-up-trucks.pdf


All times are GMT -5. The time now is 06:53 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.