The Ford Barn - V8-60hp Flywheel

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - V8-60hp Flywheel (https://www.fordbarn.com/forum/showthread.php?t=308228)

midgetracer

12-29-2021 11:52 AM

V8-60hp Flywheel

Can I machine off the cup on the 37-39 60HP flywheel and redrill it to make it into a 1940 flat type flywheel for the 9 inch clutch? Thanks for the help.

Kube	12-29-2021 12:16 PM

Re: V8-60hp Flywheel

Quote:

Originally Posted by midgetracer (Post 2089665)

Can I machine off the cup on the 37-39 60HP flywheel and redrill it to make it into a 1940 flat type flywheel for the 9 inch clutch? Thanks for the help.

Yep, you may machine the bell off of the flywheel.

Be certain to lay out the new holes VERY accurately.
Also, be certain to have it balanced after the machine work has been completed.

All times are GMT -5. The time now is 11:18 PM.