Wanted flathead teds 32-34 steering box
 

Hi everyone ,does anyone have a flathead Ted 1932 or 1934 steering box/ shaft that they bought and didn’t use ? Will pay your price , thanks John.

Re: Wanted flathead teds 32-34 steering box
 

John - PM Ted I understood he was about to make some more. The issue I believe is getting original 1934 shafts and boxes to modify .I do have one in the garage but its about to go back in and its RHD . You could always send him your box and shaft to New Zealand -Postage would be expensive but I have shipped all sorts of stuff from the States for my car -Karl

Re: Wanted flathead teds 32-34 steering box
 

Correct me if wrong, but I thought he made his own casting for the box to make room for a rolling sector shaft, no?

Re: Wanted flathead teds 32-34 steering box
 

cas3 is correct.When I asked about one last yr Ted said that nothing interchanges from the orig box.

Re: Wanted flathead teds 32-34 steering box
 

NealinCA apparently makes a replacement 37 Hudson box. He's on the HAMB most of the time


Here is a link
https://www.jalopyjournal.com/forum/posts/7667396/

Re: Wanted flathead teds 32-34 steering box
 

Yes I think you are right but he does need a steering shaft -Karl

Re: Wanted flathead teds 32-34 steering box
 

Hope Ted chimes in here to shine some light ,

Re: Wanted flathead teds 32-34 steering box
 

Here's a novel idea; you may want to PM him.

Re: Wanted flathead teds 32-34 steering box
 

Why wait.He has a Website.flatheadted.com. Contact him directly.I did.

Re: Wanted flathead teds 32-34 steering box
 

phone # for NealinCAA ?

Re: Wanted flathead teds 32-34 steering box
 

Neal's thread on the HAMB



https://www.jalopyjournal.com/forum/...#post-14240718


https://www.jalopyjournal.com/forum/.../nealinca.477/