The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   28' Roadster pickup tailgate (https://www.fordbarn.com/forum/showthread.php?t=303249)

flybob08 09-01-2021 02:03 PM

28' Roadster pickup tailgate
 

2 Attachment(s)
I have a 28 Roadster pick-up and while the brackets look right on the tailgate, the hook from the chain cannot keep the tailgate locked into position. Is something mounted incorrectly or am I missing a piece?

Any thoughts / help would be appreciated.

Bob

31Tudor 09-01-2021 02:08 PM

Re: 28' Roadster pickup tailgate
 

Instead of hooking it over the top, come up from the bottom, and then hook over. That will keep them in place going down the road.

flybob08 09-01-2021 02:38 PM

Re: 28' Roadster pickup tailgate
 

The problem is that the holes on the tailgate and the holes on the body do not line up to get the hook through, even though both hook points appear to be mounted where they belong, but maybe not

Thanks

Keith True 09-01-2021 02:50 PM

Re: 28' Roadster pickup tailgate
 

It looks right,but as 31 says the hook needs to come up through the bottom.Also,the union you are using for the link is really too big.The hook does not go through both of those holes.You have it hooked right,but just with one wrong part.

Bob C 09-01-2021 02:53 PM

Re: 28' Roadster pickup tailgate
 

The hook doesn't go through both holes.

john charlton 09-01-2021 03:05 PM

Re: 28' Roadster pickup tailgate
 

31 tudor is quite correct the pointed end of the hook must face back when you hook it not to the front as you have it . Just that simple .

John in Suffolk County England .

Ivan in southeast va. 09-01-2021 03:24 PM

Re: 28' Roadster pickup tailgate
 

1 Attachment(s)
Here is my 31wide bed ccpu. Hook from under, otherwise the hook likes to jump out.

wrndln 09-01-2021 03:34 PM

Re: 28' Roadster pickup tailgate
 

1 Attachment(s)
I am attaching a good picture of how the tailgate is fastened to the box. Note the steel loop that goes over the tailgate bracket. It appears you have some kind of aftermarket bracket instead of the original steel loop bracket Ford used.
Rusty Nelson

Dan Partain 09-01-2021 04:26 PM

Re: 28' Roadster pickup tailgate
 

1 Attachment(s)
Here's a photo of an original tailgate chain assembly with the large link.
You're tailgate has a hardware store chain repair link in place of the welded original link.

flybob08 09-01-2021 04:47 PM

Re: 28' Roadster pickup tailgate
 

Many Thanks - Pictures are worth 1,000 words and hours of trying to figure out why it isn't doing what I thought it was supposed to do

Step-down 09-01-2021 05:19 PM

Re: 28' Roadster pickup tailgate
 

1 Attachment(s)
Photos attached


All times are GMT -5. The time now is 07:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.