The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Front end wobble (https://www.fordbarn.com/forum/showthread.php?t=288223)

Magoo2 10-05-2020 11:07 AM

Front end wobble
 

My 31 CCPU has a pretty good front end wobble. My first thought was king pin bushings. I checked my wheel bearings and they were adjusted properly. The drivers side was worse so I dismantled that side and removed the king pin.the king pin is fine. When I install the kingpin into the spindle when it’s off the car it seems to fit fine with almost no play. Yet when I place the spindle on the axle there seems to be considerable play. Am I missing something? Axle does not seem to be out of round. Any advice would be appreciated.


All times are GMT -5. The time now is 02:54 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.