MARVEL SCHEBLER Carburetor
 

Hello,
Do someone know this MARVEL SCHEBLER carburetor on my 40 Ford Deluxe? Have anybody experience with this carburetor? This is a new old stock carburetor. https://uploads.tapatalk-cdn.com/202...155153fb00.jpghttps://uploads.tapatalk-cdn.com/202...98fe9332d1.jpghttps://uploads.tapatalk-cdn.com/202...eaaa7978fa.jpghttps://uploads.tapatalk-cdn.com/202...87abdc78e1.jpg

Re: MARVEL SCHEBLER Carburetor
 

Interesting. Perhaps a German product?

Re: MARVEL SCHEBLER Carburetor
 

No, this is made in USA.


Gesendet von meinem ANE-LX1 mit Tapatalk

Re: MARVEL SCHEBLER Carburetor
 

Marvin-Schebler made replacement carburetors for the Model A and I believe this is what Sears Roebuck and a few other outlets sold. They have proven popular as replacements for the stock Zenith carbs - better performance and gas mileage.

Re: MARVEL SCHEBLER Carburetor
 

This is my carb. https://uploads.tapatalk-cdn.com/202...9b2d7bc85a.jpghttps://uploads.tapatalk-cdn.com/202...9107aea939.jpghttps://uploads.tapatalk-cdn.com/202...7600338ca3.jpghttps://uploads.tapatalk-cdn.com/202...09573158a9.jpg

The inlet diameter is the same as Ford carburetor.
https://uploads.tapatalk-cdn.com/202...853acd161a.jpghttps://uploads.tapatalk-cdn.com/202...065e3e4952.jpg

Re: MARVEL SCHEBLER Carburetor
 

Big picturehttps://uploads.tapatalk-cdn.com/202...47bff8c410.jpg

Re: MARVEL SCHEBLER Carburetor
 

I would love a pair of those on my Navarro Universal Dual. They would sure get the local flathead "experts" talking.:D

Re: MARVEL SCHEBLER Carburetor
 

Here’s 2 NOS I have actually have a third somewhere and maybe in its original box will look tomorrow. The neck for air cleaner is smaller than Stromberg. It’s only 2.312. The two original Edmunds oil bath air cleaners on them are the correct size for these carbs. I have two originals for Stromberg carbs somewhere also.
Oh they are sitting on a double throw down rare pre-war Edmunds water heated risers for a V8/60.

Re: MARVEL SCHEBLER Carburetor
 

Tony,

Are the ones you have single throat?

Re: MARVEL SCHEBLER Carburetor
 

My Ford 8N had the single bbl. one.

Re: MARVEL SCHEBLER Carburetor
 

There was all sorts of aftermarket options for fords since demand was there...seller adapted and sold what they had.
I have a few nos marvels in their boxes to.
They usually had a combined 3/4 bolt multipattern base so could be installed in many different vehicles.

Re: MARVEL SCHEBLER Carburetor
 

Do they fit onto 1932 to 1933 Ford V8 single throat manifolds.

Re: MARVEL SCHEBLER Carburetor
 

there was also a fish carburetor. any body have one of these

Re: MARVEL SCHEBLER Carburetor
 

Not the universal base for the 2 barrel...but think they had singles to.

I have Fish M7 carburetors.

Re: MARVEL SCHEBLER Carburetor
 

This is very interesting stuf. Never heard of before. Love the V8 60 stuf too.

Re: MARVEL SCHEBLER Carburetor
 

Tim the three I have are twin throat base plates with single throat venturi. I did have same bolt pattern base plate but single hole models also in the past.
Tim did you get my email wi oil pan pics?

Re: MARVEL SCHEBLER Carburetor
 

[QUOTE=Ian NZ;1871913]Do they fit onto 1932 to 1933 Ford V8 single throat manifolds.[/QUOT

I have single throat MS on 1933 single throat manifold for v8


Gene Tulsa

Re: MARVEL SCHEBLER Carburetor
 

Here´s some pics of the 2 and 1 throat marvels togetter with other odd ones.

Re: MARVEL SCHEBLER Carburetor
 

OK, thees all look different to my Marvel-Schebler.

Re: MARVEL SCHEBLER Carburetor
 

Your carb is a direct replacement for the Holley 94. The others appear to be more of a universal replacement. They made a few different models, including updraft carbs.


Sal