The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Trunk lid opening (https://www.fordbarn.com/forum/showthread.php?t=270318)

Lefthander1930 10-02-2019 10:40 AM

Trunk lid opening
 

On my 29 Coupe I don't feel that the deck lid opens far enough. Tried of bumping my head. Question is, Any vendor make a prop bracket that will allow the deck to open a little higher. Other Question, Has anyone used a gas prop like they use on cars ?

Lefthander1930

1931 flamingo 10-02-2019 12:08 PM

Re: Trunk lid opening
 

Use a shortened broom stick/shower rod??
Paul in CT

tinkirk 10-02-2019 06:34 PM

Re: Trunk lid opening
 

I have two gas shocks on mine and they work great did not have to drill any holes ether


Sent from my iPhone using Tapatalk

tinkirk 10-02-2019 06:40 PM

Re: Trunk lid opening
 

https://uploads.tapatalk-cdn.com/201...a987c42938.jpghttps://uploads.tapatalk-cdn.com/201...a987c42938.jpg


Sent from my iPhone using Tapatalk

Lefthander1930 10-03-2019 10:07 AM

Re: Trunk lid opening
 

Than you for the pictures, Could you provide the length of the gas shocks. Were the mount holes already in your deck lid ? Do the shocks have a rating ?

Lefthander1930

tinkirk 10-03-2019 12:08 PM

Re: Trunk lid opening
 

Not sure on the length i bought
But i measured from the holes that the rumble hinge was bolted in and the trunk hold up latch
You can probably get away with one
I will get pics of the spot where they are attached
Terry


Sent from my iPhone using Tapatalk

tinkirk 10-03-2019 07:15 PM

Re: Trunk lid opening
 

Here are a couple more pics the shocks are 17 in mounting stud to stud



Sent from my iPhone using Tapatalk

tinkirk 10-03-2019 07:16 PM

Re: Trunk lid opening
 

1 Attachment(s)
Attachment 408536


Sent from my iPhone using Tapatalk

tinkirk 10-03-2019 07:16 PM

Re: Trunk lid opening
 

1 Attachment(s)
Attachment 408537


Sent from my iPhone using Tapatalk


All times are GMT -5. The time now is 08:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.