The Ford Barn - 1932 v8 tudor stock trans remove

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - 1932 v8 tudor stock trans remove (https://www.fordbarn.com/forum/showthread.php?t=264038)

31Abone

05-28-2019 09:58 AM

1932 v8 tudor stock trans remove

Have complete rear axle and torque tube out for repair...question do i have to remove motor to get trans out ?? seems like it by just looking..trans has bad gears so it has to come out...too old for this stuff..model A is easy compared to 32 v8...thanks in advance..

Kerk	05-28-2019 10:26 AM

Re: 1932 v8 tudor stock trans remove

Yes ! The engine has to come out to get the transmission out to work on itor replace it!! Been there Done that ! ! Kerk

rotorwrench

05-28-2019 01:07 PM

Re: 1932 v8 tudor stock trans remove

The K-member give you no other choice. This was likely the reason they changed the rear engine mounting after 1932.

31Abone

05-29-2019 01:51 PM

Re: 1932 v8 tudor stock trans remove

Thanks all ..more work for me GREAT.

All times are GMT -5. The time now is 10:41 PM.