The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Winfield Carb Spray Tube (https://www.fordbarn.com/forum/showthread.php?t=257465)

Fred A 01-11-2019 05:04 PM

Winfield Carb Spray Tube
 

Looking to complete a Winfield size C throttle. Because of the different sizes, I need to know the length of the spray tube, part S10C to aid in my shopping. The price of complete style S and SR winfields has made their practical use more difficult. Ethanol fuels seem to make reading the plugs for mixture adjustments also more difficult. Now this is for the C size. Since the banger types are very likely to use the Winfield carbs, I'll go over there to ask also. Thanks: Fred A

62pan 01-11-2019 06:14 PM

Re: Winfield Carb Spray Tube
 

I can't seem to upload a photo best I can do is give some measurements. Total length is 2 3/8 inches. Length of spray tube is 1 3/4 inches. Dia. of spray tube is 1/4 inches and dia. of knurled end is 5/16. Hope this helps.

qmdv 01-11-2019 06:14 PM

Re: Winfield Carb Spray Tube
 

The guy in the middle could tell you. Kong Jackson on the left and me on the right. Ed was pretty smart. I ran two downdrafts on that B engine

https://i.imgur.com/vjonk0ol.jpg

Fred A 01-11-2019 11:56 PM

Re: Winfield Carb Spray Tube
 

That's got to be Ed in the middle. Kong on the left, of Glendale, spent a lot his time in my Burbank neighborhood in Wes Cooper's shop. My parents worked just down the block at General Controls. Great Picture. Jim Brierly may know what house is in the background. Thanks: Fred A


All times are GMT -5. The time now is 01:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.