The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   3 spd OD parts ? (https://www.fordbarn.com/forum/showthread.php?t=249751)

1949mercury 08-16-2018 06:39 PM

3 spd OD parts ?
 

I got my transmission at the shop, second gear issues hard time getting it in second and it’s popping out. Shop is looking for parts having a hard time. Says he needs shift collar,second gear,gasket set & synchro. Where is a good place to get parts ? Vanpelt ? TIA

Talkwrench 08-16-2018 06:42 PM

Re: 3 spd OD parts ?
 

Mac [VP] will have the parts , or James at Gotham city Auto parts. Should be plenty of stuff around.

1949mercury 08-16-2018 08:05 PM

Re: 3 spd OD parts ?
 

What is Mac [vp] ? Thanks

texas webb 08-16-2018 08:18 PM

Re: 3 spd OD parts ?
 

Mac van Pelt.Google will show contact if someone doesn't post.

Charlie ny 08-16-2018 08:23 PM

Re: 3 spd OD parts ?
 

MERC
Mac Vanpelt 800 299 7496
www.vanpeltsales.com
Charlie ny

JSeery 08-16-2018 08:24 PM

Re: 3 spd OD parts ?
 

A site you need to be familiar with for a lot of resources! http://www.vanpeltsales.com/FH_web/t...prices-pg1.htm

1949mercury 08-16-2018 08:24 PM

Re: 3 spd OD parts ?
 

Ok thanks. I didn’t get the abbreviation. I gave the shop his number.

rotorwrench 08-17-2018 09:24 AM

Re: 3 spd OD parts ?
 

These transmissions are a lot like the earlier Ford side & top shift transmissions except for the overdrive system. Intermediate gear or 2nd is the rear side of the two synchronized speed selections with the high 1 to 1 drive or 3rd being in the front. The 2nd gear pop out is usually a thrust surface wear indication. Clearances have to be to minimums to reduce the possibility of the 2nd gear synchro being forced out of mesh. I hope you rebuilder checks all the thrust surfaces well.


Tell your rebuilder than Mac VP has shaft snap rings that are much easier to remove and intall then OEM and they are the correct thickness to maintain correct internal clearances. He has a thrust washer kit for the cluster gear that a person can get proper clearances with. He makes an effort to get the best parts that are currently available. His transmission book for the old Ford units is the best reference I've yet found. It doesn't cover the overdrive but it's good for the gearbox.

Kahuna 08-17-2018 10:33 AM

Re: 3 spd OD parts ?
 

To further what Rotorwrench has said, there is a lot of good info on the internet re the R-10 & R-11 Borg Warner Overdrive systems.

1949mercury 08-19-2018 12:49 PM

Re: 3 spd OD parts ?
 

OK thanks.rotorwrnch I will call him on Monday.

russcc 08-19-2018 06:37 PM

Re: 3 spd OD parts ?
 

Mac has a book, (booklet) on the overdrive transmissions as well as the main book.


All times are GMT -5. The time now is 06:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.