292 Y-Block Cam Fuel Pump Eccentric
 

I sold my 1956 Ford Sunliner 292 Y-Block which I had taken the engine out to rebuild. The buyer called that he can't find the Camshaft Fuel Pump Eccentric, washers and nut. It makes no sense as I labeled and put every part in a bag as it came off. Anyway, I looked at the online stores and I am not finding where I can purchase these parts.



Am I just not looking at the right part description or are they no longer available new? I told him I would keep looking for the one that came off the car but it isn't looking promising. Thanks for any help.


Ron

Re: 292 Y-Block Cam Fuel Pump Eccentric
 

Re: 292 Y-Block Cam Fuel Pump Eccentric
 

Here is a Parts Illustration for the cam drive-


It is a 1957/ as the drive was upgraded form the 1954/56 models.


The eccentric (C1AE 6287-A) can be found here- http://www.2040-parts.com/nos-1957-1...2-v8-i1779531/


What other parts do you need?

Re: 292 Y-Block Cam Fuel Pump Eccentric
 

there is no nut for the eccentric

Re: 292 Y-Block Cam Fuel Pump Eccentric
 

(well duh... :o)
There's a Swap Meet section here on FordBarn. You can look thru the For Sale listings or put an ad in the Wanted section

https://www.fordbarn.com/forum/forumdisplay.php?f=6

Re: 292 Y-Block Cam Fuel Pump Eccentric
 

You could try to contact Ted Eaton (Eaton Balancing), who works on Y-Blocks all of the time. (254) 857-3339 [email protected]


Or try John Mummert www.ford-y-block.com.


They should both be able to help you out.


Sal

Re: 292 Y-Block Cam Fuel Pump Eccentric
 

Another source is y-blocksforever.com You will have to sign up.

Re: 292 Y-Block Cam Fuel Pump Eccentric
 

The buyer called me tonight that he looked in another box and found all of the pieces. Thanks to everyone for the replies. Just glad they were there as I couldn't believe I would have lost them.
Ron