Machine Videos
 

There are some Machine Videos of this machine Shop doing a Model A, or B, Ford.


Comments Please!




https://www.youtube.com/watch?v=rDD78ADKP_w

Re: Machine Videos
 

Crank grinding one was revitting.
Saw a recent build and owner ordered a second right away.
Said it ran like a Swiss watch. However, when towed on a dolly in gear the first engine took out #1 cylinder.

Re: Machine Videos
 

Where is the head and block resurfacer. Where is the boring bar, who chases a cylinder bore on mill. Needs sleeve and valve seat installed. Forget about boring oversize, let's just hone it dry, it cuts faster. We dont own a cylinder honing machine, or boring bar. It's a blue printed "race block". I'm sure I saw a positive pressure clean room for assembly, didn't you? You saw in on the Internet, it must be true.

Re: Machine Videos
 

Better off using a file !!

Re: Machine Videos
 

Bet they used the scale to tram the head in as well, before they put their last good insert in that bear claw. Actually don't think there was one good insert in that thing.....

Re: Machine Videos
 

Well maybe I should watch the video first, assumed it was of your video.

Re: Machine Videos
 

Mickey Mouse was a piker compared to those guys.

Re: Machine Videos
 

...