The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Gearbox mount (https://www.fordbarn.com/forum/showthread.php?t=244573)

fordlovr 05-18-2018 03:02 PM
Gearbox mount
 

Are the gearbox mounts on 37/38/39 different to the 46-48? as in the measurement between bolt holes? also does the 46-48 mount bolt up to the earlier gearbox? Thanks

Mac VP 05-18-2018 04:23 PM
Re: Gearbox mount
 

The 37-40 (and some 41 applications) mounts have a 10” spacing between the two holes. The 42-48 closed drive rear mounts have a 8” spacing. Both can be bolted up to any 32-48 case (top or side load). The 42-52 pickup truck rear mounts were open driveline but still have the 8” spacing. Those also bolt up to all the 32-48 cases.

fordlovr 05-19-2018 12:02 AM
Re: Gearbox mount
 

Quote:
Originally Posted by Mac VP (Post 1630593)
The 37-40 (and some 41 applications) mounts have a 10” spacing between the two holes. The 42-48 closed drive rear mounts have a 8” spacing. Both can be bolted up to any 32-48 case (top or side load). The 42-52 pickup truck rear mounts were open driveline but still have the 8” spacing. Those also bolt up to all the 32-48 cases.
Thanks very much for that:


All times are GMT -5. The time now is 01:16 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.