The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   John Wolf of Automotive Engineering in Ely Iowa (https://www.fordbarn.com/forum/showthread.php?t=240158)

Kube 03-02-2018 05:21 PM

John Wolf of Automotive Engineering in Ely Iowa
 

Anyone know of this fellow's craftsmanship re rebuilding engines?


John Wolf of Automotive Engineering in Ely, Iowa

Kube 03-03-2018 09:35 AM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

No one?

rotorwrench 03-03-2018 10:12 AM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

You might check the members list for EFV8 club to see if he's listed or if there is a club group near there. Ely is close to Cedar Rapids.

TomO 03-03-2018 10:48 AM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

John Wolf drove his 32 3 window coupe on the 2012 National Tour. His car ran very well and he seemed very knowledgeable about the cars. His son may have the business now.

One of our RG members bought a core block from him, but did not have him build it.

rotorwrench 03-03-2018 10:58 AM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

The only other info I could find was that they are listed as a salvage yard and used car sales but that's about it. A lot of folks still don't do the internet.

Kube 03-03-2018 03:24 PM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

Thanks guys. I've done as thorough a search on the man that I am able to do. I can't find any "feedback" in regard to his engine builds.

He has an engine that I may be interested in. I am apprehensive to buy a "rebuilt" engine without knowing from whom I am buying it.

tubman 03-03-2018 04:06 PM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

"A preposition is not a proper word to end a sentence with".:D

Frank Miller 03-03-2018 06:33 PM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

Quote:

Originally Posted by tubman (Post 1600595)
"A preposition is not a proper word to end a sentence with".:D

I had a boss that said that.
I replied, Is that your standard answer to, is it in?

1931 flamingo 03-03-2018 08:36 PM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

He runs and ad in Hemmings............................FWIW
Paul in CT

deuce_roadster 03-03-2018 08:49 PM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

Unless I personally know the builder of an engine that I purchase, I always tear it down. The cost of a gasket set easily affords me to sleep well after checking EVERYTHING. Perhaps you could get him to stand by his work by agreeing to take the unassembled engine back after you have checked it out if you are not happy with what you find.

Corn Fed 03-03-2018 10:31 PM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

I have known John for years. He is as honest a guy as they come. He ran a machine shop for years but sold the business off except for enough to rebuild 4 cylinders. I believe he has done the last batch of motor rebuilds hes going to do and go into full retirement. I would not hesitate to buy one of his rebuilds.

Steve in Denver 05-22-2018 09:13 PM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

Anyone have an email address for John Wolf? I had it til my machine crashed.
Steve

mick 05-22-2018 09:28 PM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

I bought a 35 completely rebuilt from him , a wonderful engine . Quality work and honest . Mick

alchemy 05-23-2018 01:28 PM

Re: John Wolf of Automotive Engineering in Ely Iowa
 

I doubt John has an email. His business in Ely has been sold, and he now works out of his home shop in Western, Iowa. This is a small town about 5 miles west of Ely.

I have a '39 Merc V8 that he built in my '32 tudor. As stated above, he is an honest guy who does good work. He has built many flathead 8's and 4's, but I think he is only concentrating on 4's now. Google his number and give him a call.


All times are GMT -5. The time now is 04:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.