Rear drums
 

I need a little help with the ID of my rear drums /hubs . I would like to replace the bearing inside the hub. The hub is on the insiade of the drum. I thought they were 46/48. I ordered new bearing, they measure 2.82 on the out side. However the ones I took out measure about 3.18 across. The rear end is a 1932, backing plates are 46/48. Iam sure the answer is simple, I just don't know . Help

Ken

Re: Rear drums
 

B-1225 is the part number for the bigger bearings you require

Re: Rear drums
 

Thats the part number they were to send me . I will have to call them Monday.
Thanks

Re: Rear drums
 

Sounds like they sent you 68-1225.

Bob

Re: Rear drums
 

need to check the invoice too, just to make sure what they thot you ordered vs was sent