![]() |
Header panel attachment 36 Tudor!!! Can somebody describe how the metal header panel is to be attached om a 36 tudor? I am talking about the formed metal panel above the windshield (on the interior) that covers the radio speaker and windshield wiper motor.
I see that it is attached with screws through the bottom, but are there screws also across the top of the panel (visible), maybe screws and finish washers? Thanks for the help. Royal |
Re: Header panel attachment 36 Tudor!!! screws and finish washers
|
Re: Header panel attachment 36 Tudor!!! Thanks, alanwoodieman.
|
Re: Header panel attachment 36 Tudor!!! 2 Attachment(s)
This is how it looks
|
Re: Header panel attachment 36 Tudor!!! There are two metal or wood backing pieces that attach at the top side of the panel to the vertical structure braces (hope you understand what I mean), and that is what the top of the header panel is screwed to. If those pieces are missing (mine were) get some pictures from someone who has them. I made mine out of wood. Takes some time as they aren't just a straight piece. Good luck. Rod
|
Re: Header panel attachment 36 Tudor!!! I asked the same question for a 35 Fordor and got a wealth of information.
Check out the link https://www.fordbarn.com/forum/showthread.php?t=190171 https://www.fordbarn.com/forum/showthread.php?t=184069 Dave/Green Bay |
Re: Header panel attachment 36 Tudor!!! Great help from the Fordbarn, as usual.
Thanks to all. Royal |
All times are GMT -5. The time now is 02:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.