The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Photo of curved back trunk? (https://www.fordbarn.com/forum/showthread.php?t=222364)

smittykid 06-09-2017 05:09 AM

Photo of curved back trunk?
 

1 Attachment(s)
Does anyone out there have a pic of a curved back trunk (no spare tire) installed on a 31 Victoria? Specifically like the ones Snyder's sells. I'm picking up that Victoria I've been looking at. Sooner or later I will be installing a luggage rack and trunk. Thanks in advance, Smitty.

Bob Bidonde 06-09-2017 08:22 AM

Re: Photo of curved back trunk?
 

1 Attachment(s)
Here's one on a 190A Leather-Back.

BILL WILLIAMSON 06-09-2017 08:43 AM

Re: Photo of curved back trunk?
 

That's a FANCY trunk, Bob!
Even has drawers below. Trunks were probably a BIG seller!
Bill W.

Y-Blockhead 06-09-2017 10:24 AM

Re: Photo of curved back trunk?
 

Does Snyder's even have a trunk that will fit a Vicky? The curved back one they have is for a Sedan and it appears the back curves the opposite way as what is needed for the Vicky.

Automotive Stud 06-09-2017 10:33 AM

Re: Photo of curved back trunk?
 

Quote:

Originally Posted by Bob Bidonde (Post 1483505)
Here's one on a 190A Leather-Back.

That's sharp!

Great Lakes Greg 06-09-2017 11:17 AM

Re: Photo of curved back trunk?
 

I think Y-Blockhead is right. You may end up with a straight back.

H. L. Chauvin 06-09-2017 12:06 PM

Re: Photo of curved back trunk?
 

Hi smitty,

Just a suggestion:

If you do not have these already, and if you can determine that nobody sells new, custom made Victoria trunks, or good used Victoria trunks, it may be time to think about buying a hand saw and ordering a catalog that lists vintage trunk hardware.

This would appear to be a somewhat different & interesting future project.

denniskliesen 06-09-2017 12:34 PM

Re: Photo of curved back trunk?
 

I was thinking about building my own trunk, just for the satisfaction that it would be a one of, recently and noticed Snyder's sells all of the hardware.

Smurkey 06-09-2017 02:01 PM

Re: Photo of curved back trunk?
 

https://www.restorationstuff.com/

Hardware you might be able to use...

Bob-A 06-09-2017 04:11 PM

Re: Photo of curved back trunk?
 

Bob Bidonde,

Where is the pic of the 190-A Leather-Back from? She sure is one sharp looking "A"!;) I especially like the double sided white walls.:eek: Could they be "factory" installed for some promotional stunt?!?:confused:

Bob-A:D

smittykid 06-10-2017 07:27 AM

Re: Photo of curved back trunk?
 

Quote:

Originally Posted by Y-Blockhead (Post 1483561)
Does Snyder's even have a trunk that will fit a Vicky? The curved back one they have is for a Sedan and it appears the back curves the opposite way as what is needed for the Vicky.

When I looked on Snyder's online catalog-it appeared to me that the black curved back trunk would not fit a Vickie. However, from the pic of the tan curved back trunk-it almost look like the curve is opposite of the black one. I just got off the phone with Snyder's and they assured me both the curved trunks are the same angle. So it looks like I'm going to have to go with a straight back trunk. Thanks to all for your input. Smitty


All times are GMT -5. The time now is 04:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.