|
speed bleeders anyone know where to buy russell speed bleeders for early fords in so-cal? or mail-order? thanks!
|
Re: speed bleeders Summit, Jegs, Amazon, Ebay, O'Reilly, Autozone to name a few.
Bob |
Re: speed bleeders I installed them a couple of years ago and they work great. Only problem is I can bleed alone and don,t have the wife out to do the pump and hold. If you have drum retainers on the rear get the longer ones.
John |
Re: speed bleeders I have bought them here http://www.speedbleeder.com/ direct. They work well.
|
Re: speed bleeders Well, I have the dreaded DOT 3 in my system so I bleed the lines every year (3500 miles each year + or -). 10 years now and no problems.
|
Re: speed bleeders I use Speed Bleeders but here's a design never heard of.
https://www.summitracing.com/parts/e...43saAhjD8P8HAQ |
Re: speed bleeders I just installed my first set on my '40, they worked great. Best thing is that I no longer have to listen to the ex-wife, daughter or present girl-friend whine about helping bleed the brakes... that is blessing enough.
|
Re: speed bleeders Quote:
|
Re: speed bleeders Quote:
But, at almost twice the cost. |
Re: speed bleeders Which part number did you go with? I'm looking for a set for a 41.
|
Re: speed bleeders Quote:
https://www.summitracing.com/search?...leeders&page=2 |
Re: speed bleeders 2 Attachment(s)
Quote:
fits easier and so does the bleeder hose. Use 7/16 box end wrench. The number for the long Speed Bleeders that I used on my 40 is SB3824L. Buy 4. They will also fit your car. They cost me $28 plus $6.00 shipping in 2011. Note: 1939 MT Products backing plates and drum are shown in the photos but the long bleeders will also work on the 41 set up. |
Re: speed bleeders $600 shipping is a little steep ain't it?....... Mark
|
Re: speed bleeders Quote:
|
| All times are GMT -5. The time now is 12:31 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.