28 front fender bolts
 

Can someone point me in the right direction or post a picture as to how the front fenders are mounted. Not sure of the location or type of bolts used from the hood shelf forward. Any help would be appreciated.

Re: 28 front fender bolts
 

The 1/4" bolts with small 3/8" heads and nuts should be white cad plated with the heads on the outside. The nuts are 1/2" across the flats (most 1/4" nuts are 7/16" across the flats, so these are kind of unique). The fender bolts between the front fender and the splash apron are 5/8" long. The lock washers are plain steel. This information is from page 25 and 26 of the Standard Hardware booklet written by Mick Isbell.
Rusty Nelson