The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   What size jets ? (https://www.fordbarn.com/forum/showthread.php?t=199756)

mike42 07-04-2016 02:37 PM

What size jets ?
 

My '40 runs really rich as I have black soot coming out the tail pipe at start and I get poor gas mileage.

What size jets are recommended for 85hp - '40 and is there something else I can do to lean it out ?

Thx....Mike

Ol' Ron 07-04-2016 04:04 PM

Re: What size jets ?
 

Could be just a bad Power valve.

scicala 07-04-2016 05:06 PM

Re: What size jets ?
 

Quote:

Originally Posted by Ol' Ron (Post 1318742)
Could be just a bad Power valve.


That would be the first thing I would check.

Sal

flatjack9 07-04-2016 07:01 PM

Re: What size jets ?
 

Should be around 51 main jets.

Walt Dupont--Me. 07-04-2016 07:08 PM

Re: What size jets ?
 

51 jets, but I think you'll find the power valve is carput. Walt

mike42 07-05-2016 08:25 AM

Re: What size jets ?
 

Should I buy a new Power Valve or just clean it. If so...where to buy ?

Thx....Mike

chap52 07-05-2016 08:50 AM

Re: What size jets ?
 

Check with CharlieNY on this site. Has machined PV's that's seat properly.

mike42 07-05-2016 12:03 PM

Re: What size jets ?
 

Thx Chap....

Mart 07-05-2016 12:07 PM

Re: What size jets ?
 

Type this into google:

running rich site:www.fordbarn.com

Lots of posts here for 94s running rich. I have typed out the long list of things that can cause it many many times. Once only recently.

This was it:

https://www.fordbarn.com/forum/showthread.php?t=197943

Lots of things to check before changing jets.

Mart.

mike42 07-05-2016 01:03 PM

Re: What size jets ?
 

Thx Mart

fordhistory 07-07-2016 09:01 AM

Re: What size jets ?
 

Yeah, you are at or close to sea level, so #51 jets should be just right for you altitude. Must be something else causing rich condition.

woodiewagon46 07-07-2016 01:52 PM

Re: What size jets ?
 

You might try a company called Renners Corner. They only advertise '28 to '34 but they might be able to help. All the jet's that I had purchased before Renners were JUNK. If you check them with a pin gauge they weren't even close. Renners flow tests every jet and gives you a paper showing the results. You can't ask for better service.

mike42 07-08-2016 01:52 AM

Re: What size jets ?
 

Thx woodie I'll give them a try along with new power valve.

Mike


All times are GMT -5. The time now is 11:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.