Banjo rear end
 

Are there any numbers or any identifying parts to tell if a rear is a 34 or a later rear end?

Re: Banjo rear end
 

Here's some info that may help...

http://www.flatheadv8.org/fordrear.htm


Lonnie

Re: Banjo rear end
 

1934 and EARLIER center sections (BANJO housing) measure 3-1/2" wide.

1935 and LATER center sections measure 3-13/16" wide.

Also, '32 through '34 spring hangers are cast at a slight angle to accept the FORWARD-sweeping, curved spring pack used on those models. Of course, '35 and '36 rears have no "cast-in" spring hangers, as they are incorporated into the ends of the bolt-on rear radius rods or wishbones. DD