Seal Drip Rail Gutters on 30 Coupe
 

The pictures are of the drip rails on my 30 coupe. They are welded on and I am not going to remove them. I can straighten the gutter and push it back but there will still be a gap. What should I use to seal the gaps between the roof and the gutters (shown In the pictures)?

Re: Seal Drip Rail Gutters on 30 Coupe
 

You could try "Seaming Compound". It's the stuff used to seal panels that have been spot-welded together (seams in trunks, etc.). You can prime and paint it just fine. I have some in a quart can that I bought long ago from an automotive paint supplier. I think you can also get it in a tube for a caulking gun. I think that Eastwood also has it.

Re: Seal Drip Rail Gutters on 30 Coupe
 

Silicone would work just fine. Can be painted also. Give it 24 hours to set up.

Re: Seal Drip Rail Gutters on 30 Coupe
 

Bruce's idea sounds good ..
We use this seam sealer

Re: Seal Drip Rail Gutters on 30 Coupe
 

Silicone promotes rust, as I learned from a windshield installer. Use what Mitch shows.

Re: Seal Drip Rail Gutters on 30 Coupe
 

Mitch and Tom are giving good advise. Some silicone is not paintable.