The Ford Barn - 2 V8 60 ironside engines

I have two iron side V8 60 flathead engines.
Engine #1: Engine block with reciprocating assembly, valvetrain and oil pan. One piston and rod is missing.
Engine #2: Engine block (relieved) with one visible cylinder sleeve. Has oil pump with pickup and main caps.

Parts: 2 crankshafts, 1 camshaft, 16 valve assemblies, 1 set (plus a few extra) lifters, 6 rods, 1 single carb aluminum intake, 1 pair of iron cylinder heads, 1 crank pulley, 1 oil pump, 2 water pumps (no front cover), 1 pair of wire looms, 1 rear main seal retainer, a bag of extra valves and springs, 13 NOS valves (3 have some rust spots on them) and 11 NOS valve springs.

Pickup Only. Additional pictures on request. Trades for off brand flathead intakes, heads and ignitions considered.

Please PM me for more pictures